• العربية
  • QP Flag

Skip Navigation LinksRP_RefinedProducts

Home > Home > Marketing > Regulated Products - Refined Products

​Refined Petroleum Products

Gasoil 10ppmS​

Produced solely from Laffan Refinery splitting operation (does not include any cracked or chemically produced product), this gasoil is desulfurised to meet 10ppm sulphur specification. Nearly all of product is consumed in the domestic market but occasionally, exports are available from Ras Laffan in 40KT cargo lots.

Ports​Ras Laffan Industrial City – loading berth # 23​​
​Typical cargo size40KT​
​SpecificationGasoil 10ppmS​​​

Gasoline

Two grades are produced at QP Refinery in Mesaieed - Premium Grade (91RON) and Super Grade (95RON). The products are primarily produced to meet local demand, however, surplus of both grades is exported in 30KT cargo lots. 

Ports​Mesaieed Industrial City – loading berth # (6)​
​Typical cargo size30KT​
​SpecificationPremium Gasoline 91RON​

Super Gasoline 95RON: 
​
Ports​Mesaieed Industrial City – loading berth # (6)​
​Typical cargo size25KT to 30KT
​SpecificationSuper Gasoline 95RON​​

Jet A-1

Jet A-1, also known as Aviation Turbine Jet Fuel. Jet A-1 fuel is produced both at Mesaieed and Ras Laffan. Production from QP Refinery in Mesaieed is solely dedicated to meet Qatari airports’ requirement while Ras Laffan production is intended for both export and any additional domestic demand.  ​


Ports​Ras Laffan Industrial City – loading berth # 23​​ & 30
​Typical cargo size40KT​ to 60KT
​SpecificationJet A-1


Straight Run Fuel Oil (Line Flush)​​

Typically used as blending stock in bunker fuels. Any export from QP Refinery in Mesaieed is usually as line flush to move decant oil. However, in the case of a Fluidized catalyst cracker (FCC)   shutdown, this product may be available in larger quantities up to 40,000 MT.​

Ports​Mesaieed Industrial City – loading berth # (6)​
​Typical cargo size30 - 40KT
​SpecificationStraight Run Fuel Oil (Line Flush)

Decant Oil

Decant Oil (DC O) is heavy oil recovered from the bottom of a Fluid Catalytic Cracking (FCC) Unit at QP Refinery in Mesaieed​.  
As the end of the processing chain, DCO is high in density and in sulphur content, but low in viscosity (less than 100 cSt). DCO is used as a blending material for utility/bunker fuels or in production of “carbon black”.

Ports​Mesaieed Industrial City – loading berth # (6)
​Typical cargo size15KT to 20KT​
​SpecificationDecant Oil​​